← Back to articles list (Ugrzejmnie)
🔥 Ugrzejmnie • November 16, 2026

No more “notebooks by the scale.” How does a fleet management and route planning system help fuel depots fill up trucks without losing customers?

Most fuel depots and LPG suppliers have completed orders in their delivery history that slip through the cracks due to a lack of time in the office. See how combining fuel consumption forecasts with “Daily Route” planning allows you to load up trucks along the route, and how data pseudonymization protects your customer database.

Samochód ciężarowy z opałem na wadze najazdowej przy biurze składu opału (Ilustracja wygenerowana przez AI w celach poglądowych)
⚡ AI Generated
ℹ️Image generated using Artificial Intelligence (AI) for illustrative purposes.

Most fuel depots and LPG suppliers have data in their archives that they do not fully utilize on a daily basis: a history of deliveries from the past few or several years. When a truck leaves the yard with two metric tons of coal or a partially loaded tanker headed for a neighboring municipality, a few properties down the road, a regular customer is just running out of fuel—but during peak season, no one in the office has time to manually review old delivery slips.

Below, we show how the retention system works in conjunction with “Daily Route” planning and how the separation of identifiers protects the depot’s customer database from third-party access.


Why is the depot losing repeat customers and making incomplete deliveries?

At a traditional coal or pellet warehouse, or at a local propane distributor, sales rely mainly on waiting for a call from a customer. The problem arises when a customer goes down to the boiler room and realizes that their supply will run out in two days:

  1. They look for an “immediate” delivery: They type *“eco-coal with delivery”* or *“propane price”* into a search engine and find offers from middlemen or nationwide mail-order stores.
  2. They place an order at a logistically suboptimal time: They call to order the goods exactly two days after your truck was in their town with an incomplete load.
  3. No time for analysis in the office: Between operating the scale, answering phones, and handling excise tax documents, an office employee isn’t able to check the map every day to see which residents in a given village are about to run out of fuel from the fall delivery.

As a result, instead of making a single trip with optimal load capacity and delivering to two or three customers along the way, the truck ends up making several separate trips to the same location.


How does the retention engine work in conjunction with the “Route of the Day”?

At UgrzejMnie, we’ve combined two operational elements that are rarely analyzed together in a traditional office: the estimated fuel consumption rate at the customer’s location (Burn Rate) and the available load capacity on your vehicles’ scheduled routes.

1. Consumption forecast based on delivery history

Based on completed orders (entered as digital e-WZs or imported from a CSV/XLSX file), the algorithm calculates the average daily fuel consumption rate for a given delivery point.

To avoid premature suggestions immediately after a delivery, the algorithm subtracts the last delivered tonnage or literage from the historical total (since this fuel is still in the customer’s boiler room or tank) and divides the fuel consumed previously by the number of days between historical deliveries. Based on this, the system indicates: * locations where the estimated stock has fallen below 25%, * the approximate number of days until the stock runs out (EstimatedDaysToEmpty), * customers for whom more than 60 days have passed since their last order of the season.

2. Correlation with Available Loading Capacity on the Route (Route Run)

The mere fact that a customer 25 km from the depot is running out of fuel does not always justify sending a separate truck with one metric ton of cargo.

Therefore, the retention module compiles a list of customers with trips scheduled for the next 14 days (Trips of the Day), searching for vehicle routes with at least 1,500 kg of available cargo capacity, and calculates the distance from the scheduled stops to the regular customer’s delivery point.

Based on this, an organized priority list (Lead Score) is generated in the office dashboard for quick phone contact before the vehicle departs:

ℹ️Ważna informacja

Example of a suggestion in the dispatcher’s dashboard:

*Customer #1248 – estimated supply: 18% (approx. 9 days until depletion). Your truck is traveling 3.4 km from this address on Thursday and still has 2,000 kg of available cargo capacity.*

A quick phone call from the warehouse office: *“Good morning, our truck is passing through your town on Thursday and we still have 2 metric tons of free space on the truck—should we add you to the route?”* allows you to close the order before the customer starts looking for alternative offers.


Simulation Scenario: Single Trips vs. Additional Loads Along the Route

The table below presents an example simulation scenario for a local fuel warehouse that makes 120 trips during the heating season using a 5-metric-ton truck, assuming that, thanks to pre-trip coordination, the company can add 25 deliveries (1.5 metric tons each) to routes that previously departed with less-than-full loads.

Assumptions for mileage calculation: * In the single-trip model, each of the 25 additional deliveries requires a separate trip over an average distance of 18 km one way (36 km round trip): 25 × 36 km = 900 km. * In the model of adding deliveries to a scheduled route, the average detour from the main route to a neighboring town is approximately 3 km per stop: 25 × 3 km = 75 km. * Estimated difference in mileage over the course of a season: 900 km - 75 km = 825 km.

Operational Parameter (Example Scenario)Traditional Service (“notebook / separate trips”)Service with Retention Module and Course of the DayDifference in Scenario
Additional deliveries added to routesDepends on when the customer calls25 deliveries added before departure (1.5 metric tons each)+37.5 metric tons of fuel delivered as part of existing routes
Mileage associated with serving these 25 locations25 separate trips × 36 km = 900 km25 detours from the route × 3 km = 75 kmMileage reduced by approx. 825 km
Pre-departure tonnage checkManually totaling weights from paper WZ documentsAutomatically calculating order weights against vehicle payload capacity (kg)Reduced risk of vehicle overloading
Planning subsequent deliveriesNeed to manually review order historyOrganized queue of contacts for the office with notes on the outcome of each conversationSystematic contact with regular customers

Protecting the Customer Database: How Do Identifier Separation and Pseudonymization Work?

A natural concern for any warehouse owner who has built relationships with customers over decades is the security of commercial data: “I don’t want to transfer a complete list of my customers—including names and phone numbers—to an external system.”

That’s why the retention module for external providers uses a mechanism of pseudonymization and separation of identifying data:

  1. A pseudonymized identifier (`client_token`) instead of personal data: The route priority calculation engine does not require your customers’ first names, last names, or phone numbers. During external integration, the provider’s system transmits only a pseudonymized client token (e.g., generated using a secret HMAC on the company’s side or a random identifier assigned in the internal warehouse database), aggregated consumption parameters, and approximate coordinates needed to calculate the distance from the route.
  2. Company-controlled token–client mapping: It is impossible to reconstruct personal data from the client_token identifier alone without access to the secret key or the mapping table stored on the provider’s side. Only an authorized employee in your office’s dashboard can see which customer in the database corresponds to a given retention signal.
  3. Structured contact and consent process: During a phone call, an office employee records the contact status in the system (e.g., delivery ordered, no answer, consent to be contacted by phone during future deliveries in the area), which allows sales activities to be conducted in an organized manner and in accordance with the consents collected.

Summary: Where to Start with Implementation at the Warehouse?

To use route planning and retention prompts, you don’t need to build your own online store or change how you take orders over the phone. All you need to do is: * issue digital e-WZ documents for current phone orders (signed on the driver’s phone screen via a link or QR code, without needing to install an app), or * upload delivery history from a CSV / XLSX file.

The system will continuously match your vehicles’ scheduled trips with locations along the route where coal, pellets, or propane are running low—helping you make better use of your fleet’s payload capacity while maintaining full control over your customer base.

--- *The main illustration for this article was generated by artificial intelligence (AI) for illustrative purposes.*

🔥
Oficjalny Portal UgrzejMnie

Kompleksowy poradnik dla właścicieli domów, dystrybutorów opału i serwisantów systemów grzewczych.

Przejdź do platformy UgrzejMnie →